Most ukuleles are tuned gCEA, with the G string an octave higher than you'd expect. That's called re-entrant tuning. It gives the instrument its bright, close-voiced sound, and if you'd like a fuller bass, low G drops that string an octave.
The larger baritone ukulele is tuned DGBE, like the top four strings of a guitar, so the same shapes give different chord names on it. Check which tuning a chart is written for. The number after each note name is its octave, and G3 sounds an octave below G4.
The 3 ukulele tunings
Each line lists the open strings from the 4th string to the 1st, with a note on what that tuning does to the sound. Standard is the reference. Low G changes one string, while baritone changes the whole instrument.
The pitch names and octaves of guitar strings 4 to 1, on a larger instrument.
How the ukulele tunings compare
You'll find 48 charted chords for each tuning. We count a chord as easy when it has no barre, uses 3 fingers or fewer and stays within frets 1 to 4. Standard comes out ahead with 25, and low G and baritone each have 23.
Chords with 2 fingers or fewer in each ukulele tuning
Each tuning also has 8 chords you can play with 2 fingers or fewer. Standard and low G share the same 8. In these names m means minor, 7 means a dominant seventh, and 5 means a chord of just the root and the 5th.
Use a chromatic tuner and follow the string numbers in order, setting each open pitch and then checking the others again once they've settled, since a string you've just moved will often pull the others slightly out. Octaves matter here. A tuner that shows them helps, because G3 and G4 share a letter name but sound an octave apart.
On a standard ukulele the G and C strings sit side by side in reverse pitch order, so you should check string numbers as well as note letters. A shape such as 0003 lists the frets from the 4th string to the 1st. A 0 means an open string.
Standard tuning
The open strings are G4, C4, E4 and A4, and strummed together they sound Am7 (A minor seventh), with the notes A, C, E and G. High G is common on soprano and concert ukuleles. Pitch doesn't rise steadily across the strings.
That re-entrant order gives a bright strum with a high note under your thumb. Across a scale you may jump from G4 down to C4, and a descending melody can cross from the 4th string to the 3rd and suddenly move lower, so plan that jump before you change position.
Open pitches
G4, C4, E4 and A4
Open chord
Am7
Chord notes
A, C, E and G
C major shape
0003
Retune each string for standard
String
From
Target pitch
Change
4th string
Any pitch
G4
Set
3rd string
Any pitch
C4
Set
2nd string
Any pitch
E4
Set
1st string
Any pitch
A4
Set
Then play the C shape, 0003, by fretting the 1st string at fret 3, with strings 4, 3 and 2 open, and listen for a clean ring from all 4 strings. Start slowly so the fretted A stays clear. Before you read a tab, play one note on each open string and compare G4 with C4, so the octave jump feels familiar.
Stay with high G when you want familiar soprano or concert charts and a compact melody range, and when a song's bass line needs a lower G, try low G instead. Most common chord diagrams assume this setup.
Low G tuning
Strummed open, G3, C4, E4 and A4 form Am7 (A minor seventh), with the notes A, C, E and G. Low G keeps the G, C, E and A string names but puts the 4th string an octave below standard high G. Bass lines get more range.
A descending melody doesn't need an octave jump below C4 anymore.
Open pitches
G3, C4, E4 and A4
Open chord
Am7
Chord notes
A, C, E and G
C major shape
0003
Retune each string for low G
String
From
Target pitch
Change
4th string
G4
G3
down an octave
3rd string
C4
C4
unchanged
2nd string
E4
E4
unchanged
1st string
A4
A4
unchanged
Then play the C shape, 0003, by fretting the 1st string at fret 3, with strings 4, 3 and 2 open, and listen for a clean ring from all 4 strings. It's the same fingering as high G, so play both versions and listen for the lower note beneath the chord.
Low G suits a fuller bottom end or scale lines that descend across the full fretboard range. High G is the better pick for you when you prefer the bright re-entrant sound or need to match a chart written for standard ukulele. Try C, F and G7 in both. Then decide which 4th-string note supports the melody better.
Baritone tuning
Its open strings, D3, G3, B3 and E4, sound Em7 (E minor seventh) when you strum them, with the notes E, G, B and D. Baritone sits below soprano, concert and tenor, and its strings match guitar strings 4 to 1 in pitch and octave. You'll hear a minor color before you fret anything.
You tune each string to its listed octave, starting at the 4th string and ending at the 1st, and check each note again after the others settle. That's the order below.
Open pitches
D3, G3, B3 and E4
Open chord
Em7
Chord notes
E, G, B and D
C major shape
2010
Retune each string for baritone
String
From
Target pitch
Change
4th string
Any pitch
D3
Set
3rd string
Any pitch
G3
Set
2nd string
Any pitch
B3
Set
1st string
Any pitch
E4
Set
Then play the C shape, 2010, by fretting the 4th string at fret 2 and the 2nd string at fret 1, with strings 3 and 1 open, and listen for a clean ring from all 4 strings. Move between the open Em7 and the C chord without lifting your hand far from the neck.
The same finger positions give different chord names than they do in standard GCEA, so don't follow a copied fingering until you've checked the label. A baritone chart gives the sounding name. Choose baritone when you want a lower register and familiar guitar intervals across 4 longer strings.
Which ukulele tuning to start with
Start with standard tuning. Most common chord diagrams assume it, and it has the most easy chords of the 3, 25 of 48. Switch to low G when a song's bass line needs the lower note, or move to baritone if you'd like to use what you know from the guitar.
We use cookies to count visits and clicks so we can improve the site. Privacy